Skip to content
TOBI

Teleop base / lift / dual arm

Lifting wheeled dual-arm teleop base

A 900 mm lift covers 0–2.4 m.

Model RMC-AIDAL. Folded size 640 × 450 × 1780 mm, about 80 kg. The arm parameter table is RM75-B-V: 7 DoF, 5 kg rated, 633 mm reach, ±0.05 mm repeatability, 8 kg arm mass. The standard bill of materials lists RM65-B-V ×2. Lock the arm model before ordering. Lift travel 900 mm. Differential chassis at 1.5 m/s. Compute is Nvidia Jetson AGX Orin 64G plus a 1T SSD. The battery is LFP 48V 20Ah. This sheet does not state runtime hours.

900 mmLift travel
0–2.4 mVertical workspace
5 kgRated per arm

Source: 2026-08-03 parameter sheet. The cover's 8 kg is the arm mass in the table. Rated payload is 5 kg per arm. The cover says 3 depth cameras and 2 wide cameras. The standard bill lists D435 ×1 and wide cameras ×2, and this table follows that bill.

Lifting wheeled dual-arm teleop base

SPECIFICATIONS

Specifications and limits, together.

Checked against the 2026-08-03 parameter sheet. Where the cover, the standard bill and the arm table disagree, this page prints both and does not collapse them.

Lifting wheeled dual-arm teleop base
ModelRMC-AIDAL
Folded size640 × 450 × 1780 mm
Massabout 80 kg
Vertical workspace0–2400 mm
Side reachOne side extends 790 mm past the chassis. The sheet prints 790 without a unit, in a millimeter clause
Lift travel900 mm
DoF per arm7 (parameter table, RM75-B-V)
Rated payload5 kg per arm
Arm reach633 mm
Repeatability±0.05 mm
Arm mass8 kg per arm
Joint brakesJoints 1–4 hard brake, 5–7 soft brake
Arm commsEthernet / Wi-Fi / RS485
Standard-config armsRM65-B-V ×2. This does not match the parameter-table model. Lock it before order
Chassis640 × 450 × 250 mm, differential drive, 1.5 m/s, 5° grade
Localization±10 mm / ±3°
NavigationDepth camera ×1, IMU + encoder ×1, lidar ×1, safety edge ×1, ultrasonic ×2
ComputeNvidia Jetson AGX Orin 64G + 1T SSD
Standard visionD435 ×1, wide cameras ×2, voice module ×1
D435Ideal range 0.3–3 m; depth ≤1280×720 at ≤90 fps; RGB 1920×1080 at 30 fps; FOV 69°×42°; rolling shutter
BatteryLFP, DC 48V 20Ah. This sheet does not state runtime hours
RecommendedRM75-B-V ×2, differential chassis ×1, gripper CTAG2F90-D ×2
Teleop optionsServo, backpack, or mobile station. Not in the standard quantity table

COMPARE

Three bases. Pick by the task.

Published figures
ItemFolding dual armLifting dual armWheeled humanoid
DoF20 DoF7 / arm21
Size614×552×1700 mm640×450×1780 mm570×465×1680 mm
Massabout 125 kgabout 80 kgabout 125 kg
Payload per arm5 kg5 kg5 kg
Height0–2.1 m900 mm / 0–2.4 m2100 mm
Mobility0.1–1.5 m/s1.5 m/s0.1–1.5 m/s · 690 mm
Battery48V 20Ah / ~6 hLFP 48V 20Ah, hours not stated40 Ah · ~2 h

Folding dual arm · Lifting dual arm · Wheeled humanoid · Teleop kit · Two-finger gripper

FAQ

Write this down before ordering.

Is the gripper included?

The recommended configuration lists gripper CTAG2F90-D ×2. The standard quantity table has no gripper. Servo, backpack and mobile teleop stations are options. What ships is the written configuration sheet.

Does it connect to a TOBI headset by default?

The headset and the base are two data paths. Joint capture needs an agreed clock, topics and storage. It is not aligned by default.

Why is the older battery figure not in the table?

An older scheme note used 48V 31Ah and about 4 hours. This table uses the current published figures for the folding base: 48V 20Ah and about 6 hours. The lifting platform's sheet states an LFP 48V 20Ah battery and does not state runtime hours. Quote this table, and lock the supply revision in the contract.

PROJECT ASSESSMENT

Tell us the task. We will confirm the configuration.

Reply within about one business day. The specification table is on this page. Price, lead time, and whether an end effector or teleop station is included are confirmed in writing before the order.

+86 137 5502 0164

View specificationsAsk about configuration